Fully compatible with Intel ATX 3.0 specifications
The REVOLUTION ATX 3.0 series is fully compatible with the Intel ATX 3.0 specification and will unleash the full power potential of the new generation of hardware. Each power supply comes with a native 12+4-pin (12VHPWER) cable and an additional dual 8-pin to 12+4-pin (12VHPWER) cable to give you the most advanced performance.
ATX 3.0, power offset to 200%
The new specifications of ATX 3.0 will have a positive impact on power consumption and performance improvements across all desktop segments. It can sustain up to 200% power load during power excursions, achieve 60%-70% efficiency even at low loads, and has shorter boot times, allowing you to power up your system faster.
PCIe GEN 5.0 native cables unlock full power potential
REVOLUTION ATX 3.0 is equipped with a native 12+4-pin 12VHPWR cable, which can directly provide up to 600W of power to the latest NVIDIA graphics cards, giving gamers and creators the most stable and powerful system.
Additional cable supports two graphics cards
REVOLUTION ATX 3.0 also comes with another dual PCIe 8-pin to 12VHPWR cable in the box, allowing you to install up to two high-end graphics cards for better performance and experience.
Dual 8-pin to 12+4-pin (12VHPWER) cable
*Please note when you connect more than 1 GPU
How to properly insert the 12+4 pin 12VHPWR cable to prevent damage
Holding the sides of the cable with your fingers, insert the cable straight into the port, aligning it with the port. Make sure the cable is inserted straight in firmly and evenly without any gaps or bends.
Built for all graphics cards
Since graphics cards require additional power, REVOLUTION ATX 3.0 is designed to support all AMD, Intel and NVIDIA graphics cards based on different types of power connectors.
1 GPU power connector
2 GPU power connector
3 GPU power connector
12+4-pin GPU power connector
(extra cable for another GPU)
Excellent efficiency and best quality
Using up to 92% efficiency and the highest quality Japanese electrolytic capacitors, reducing unnecessary power consumption, saving energy and creating lower temperatures.
promote absolute silence
Designed with ENERMAX semi-fanless technology, the fan will shut down completely when the load exceeds 30%, allowing you to enjoy 0 dB(A) absolute silence during minimum load. The fan control button next to the power switch allows you to turn this feature off if needed and ensure active cooling at all times.
Reliable and secure for your system
REVOLUTION ATX 3.0 uses advanced LLC and synchronous rectifier (SR) designs to deliver unrivaled power output. DC-DC conversion optimizes stability for better voltage regulation. These ensure reliable operation of high-end processors and graphics cards.
Cables and power supply available according to your needs
With a fully modular design, connect only the cables you need. REVOLUTION ATX 3.0 will also provide the power you need for optimal compatibility and avoid overloading with a single rail +12V design.
Revolution ATX 3.0
power supply
Built for the next generation