j5create USB™ Video Camera Wireless Transceiver - DI-JVW120


Price:
Sale priceHK$999.00

Description

system requirement
  • Requires USB-C or USB Type-A port
  • Windows® 11/10
  • macOS® 10.10 or later
  • Chrome OS™
product specifications
Host interface

RX receiver: USB Type-A/Type-C Connector

port

TX transmitter:

1 x USB-C® Power In(5V/3A USB-C power input)
1 x USB™ Type-A Female (for connecting video cameras)
1 x USB™ Type-A Female (connects speaker/microphone)
1 x 3.5mm Speaker Out

RX receiver:

There is a "sound switch" at the bottom of the RX receiver, which can be quickly turned on or switched to silent mode.

ON: Sound is on

OFF: silent mode
power mode

DC 5V/3A USB-C power input

Technical specifications

Channel: 2.1 CH stereo

RF output power: +15 dBm ±1 dBm

Encryption level: 128/256-bit AES encryption, WPA2 authentication protocol

Transmission distance: up to 25 meters

Frequency band: IEEE 802.11ac

Frequency: 5 GHz Band I, Band IV, CE Only Band I

Bandwidth: 80MHz

Antenna type: Transmitter (TX): external antenna x 2

Receiver (RX): Built-in antenna
Product warranty
2 years
Performance
Function

Red light: power on

Orange light (constantly on): waiting for connection

Orange light (flashing): TX/RX pairing

Green light: TX/RX pairing is successful, and TX has also recognized the camera
Highest resolution

H.264: 2160p/1080p/720p/480p/240p @ 30 FPS, 1080p @ 60 FPS

MJPEG: 1080p/720p/480p/240p @ 30 FPS

YUV: 1080p/720p/480p/240p
physical dimension
color
black
Material
Plastic case
Product Size
TX body: 95(length) x 95(width) x 23(height)mm
RX body: 67(length) x 67(width) x 21(height)mm/Cable length: 16.5cm
USB Type-A extension cable: 60cm
weight
TX body: about 112g RX body: about 55.5g
Precautions
  • Both TX and RX are paired before leaving the factory and will automatically connect when used. If the devices are paired correctly and the USB™ video camera is connected to the TX, the camera will automatically power on.
  • If the TX and RX are within the effective distance, but the LEDs of the TX and RX devices turn red, or the TX and RX suddenly terminate the connection, please try pairing again. To turn on pairing mode, find the pairing button located on the bottom of the TX and RX units, press and hold the pairing button on the TX and RX units for 5 seconds, the power LED will turn orange and flash for 1 minute. If the TX and RX units are successfully paired, the LED will turn green and stop blinking.
  • Transmission distance and image quality may vary depending on the environment. Walls or glass may cause shortened transmission distance, poor signal or interruption.
  • The audio output priority on the TX is 3.5mm speaker → USB™ speaker/microphone → USB™ video camera with speaker/microphone.
Package Contents
  • JVW120 body (1 set of TX/1 set of RX)
  • DC 5V/3A charger
  • hook and loop tape
  • Quick installation manual
  • Warranty Card

You may also like

Recently viewed