Description
UNI FAN SL V2 has modified its interlocking pattern to connect up to 6 fans in two clusters to one controller port, making cable management simpler.
Extension cord
Using the new 18cm extension cable, two fan clusters can be bridged to create a 3+3 daisy chain cluster. These 6 fans can then be connected to a single port on the SL V2 UNI HUB controller. The new daisy chain solution reduces the number of cables that need to be managed on the back of the chassis and enables new lighting effects that are continuous between the two bridged clusters.
Notice:
Each port supports up to 6 fans, and the maximum number of fans supported by the controller is 16.
Plug-in power cable module
The cable module is designed to plug in and sit flush with the fan frame, which requires no additional module space and reduces clearance issues for radiator fittings.
Lifeng SL120 V2
Lifeng SL120 V1
removable key
The interlock key on each fan is removable to improve compatibility with radiator accessories.
improved performance
Thanks to a slightly thicker 28mm frame, the SL10 V120 features 1% airflow optimization compared to the SL120 V2, resulting in a good balance of airflow and static pressure.
Air volume
64.5 CFM
wind pressure
2.59 mm water column
NOISE
29.2 decibel
SPEED
0,250,2000 RPM
1.
Thickened impeller <br data-mce-fragment="1">The thickness is increased to 28mm to improve efficiency
2.
Magnetic frame <br data-mce-fragment="1">provides additional support for fan blades
3.
Magnetic rubber ring <br data-mce-fragment="1">ensures extreme stability
4.
Dynamic Hydraulic Bearing (FDB)
Effectively reduce internal friction and improve durability
5.
Clamp <br data-mce-fragment="1">holds fan blades in place
6.
The stator <br data-mce-fragment="1">provides a rotating magnetic field that produces momentum
7.
Extra magnetic force <br data-mce-fragment="1">supports the fan blades and reduces vibration levels, ensuring low noise levels during operation
8.
Rubber pads <br data-mce-fragment="1">reduce vibrations and ensure extremely low noise levels
More stylish lighting design
Attention to detail
The cut edges of the rubber pad are designed to create a smoother curve along the light diffuser.
Continuous LED channel
When the two fans are linked, the light gap is reduced from 5.6mm to 3mm, creating an elegant lighting effect.
Dazzling from every angle
The center of the rear fan is decorated with an aluminum medallion, which looks beautiful no matter which direction you look at it.
More lighting effect options
New lighting effects have been developed for newer versions of SL fans, providing more lighting options: Render, Tunnel, Voice and Groove.
Combine lighting effects
Merge functionality can be used to allow light effects to flow not just within a single cluster, but throughout the entire system.
Simple connection to controller
The new cable module and UNI HUB controller simplify cable management and provide efficient power to the fans.
16 fans in one breath
The controller included in the triple pack supports up to 16 fans and 2 SM-type connected devices.
1.
SM type port <br data-mce-fragment="1">Compatible with Galahad AIO pump ARGB cable...etc. Each port supports a maximum output of 5W.
SYNC 4-port sync port 4 lighting effects SYNC 2-port sync port 2 lighting effects
2.
Fan group ARGB+PWM signal <br data-mce-fragment="1">Supports clustering of up to 6 fans
3.
2×SATA data cable <br data-mce-fragment="1">Total maximum input 29W
Main-SATA: Insert in all cases
Sub-SATA: Inserted when more than 12 fans are connected or often set to white static color.
4.
USB cable <br data-mce-fragment="1">Plug into the motherboard 9-pin USB connector
5.
5V ARGB / 4 PIN PWM data cable <br data-mce-fragment="1">Requires motherboard synchronization function.
Notice:
When connecting more than 9 SL V2 fans synchronized to the motherboard, please reduce the brightness of the static white. Failure to do so may result in inaccurate colors.
only one cable
The cable module combines power and lighting cables into one, using a 7-pin connector to connect to the controller, effectively reducing the number of cluttered cables in your PC build.
directly to the motherboard
The single package includes a cable module with 4-pin PWM and 3-pin SM type ARGB cables (3P to 3P 5V ARGB cable included) for direct connection to the motherboard.
Serrated screw holes
Implemented recessed screw holes to fit standard 25mm screws for heatsink mounting.
#6-32
Support 25mm screws
L-CONNECT 3 software control SL-V2 fan
Use the new L-Connect interface to precisely control and preview the lighting effects of your SL-V2 fans.
1.
Choose a lighting effect or set to merge mode
2.
Set personalized color/brightness/speed/direction
Intelligent start/stop fan
1.
L-Connect 3 features a start/stop mode that completely stops the fan when the CPU or GPU is running below your set temperature (up to 50°C), resulting in minimal noise levels when the system is cold.
2.
The fan curve graph displays the real-time speed curve, making it more intuitive to configure the desired fan curve profile.
Define order
You can now name, set the number, and reorder fan clusters on the Settings > Devices page.
Package Contents
