Daisy chain slide
Improve performance
Exquisite lighting effects
Cableless with controller
Start/stop fan
L-Connect 3 software
Available in two sizes and two colors
white/black
SL120 V2
black, white
SL140 V2
Upgraded Modularity
UNI FAN SL V2 has modified its interlocking method to connect up to 6 fans from two clusters to a single controller port, making cable management easier.
extension cord
With the new 18cm extension cable, two fan clusters can be bridged to create a 3+3 daisy chain cluster. These 6 fans can then be connected to a single port on the SL V2 UNI HUB controller. The new daisy chain solution reduces the number of cables to manage on the back of the case and enables new lighting effects that are continuous between the two bridged clusters.
Notice:
Each port supports up to 6 fans, and the controller supports up to 16 fans.
Plug-in power cord module
The cable module is designed to plug into and flush with the fan frame, eliminating the need for additional module space and reducing clearance issues for radiator fittings.
UNI FAN SL V2
UNI for SL120 V1
removable key
The interlock key on each fan is removable to improve compatibility with radiator accessories.
Improve performance
Thanks to the slight increase in frame thickness to 28mm, the SL120 V2 has 10% airflow optimization compared to the SL120 V1, achieving a good balance of airflow and static pressure.
air movement
64.5 cubic feet
static pressure
2.59 mm water column
noise
29.2 decibels
speed
0. 250-2000 rpm
1. Thickened impeller <br>Thickness increased to 28 mm, higher efficiency
2. Magnetic frame <br>provides extra support for fan blades
3. Magnetic rubber ring <br>ensures extremely high stability
4.Fluid dynamic bearings (FDB)
Effectively reduce internal friction and improve durability
5.Clip spring
Used to hold fan blades in place
6. The stator <br>provides a rotating magnetic field that generates momentum
7. Extra magnetic force <br>supports the fan blades and reduces vibration levels, thus ensuring low noise levels during operation
8. Rubber pad
Reduces vibrations and ensures extremely low noise levels
More fashionable lighting design
attention to detail
The cut edges of the rubber pads are designed to create a smoother curve along the light diffuser.
Continuous LED channel
When the two fans are linked, the light gap is reduced from 5.6mm to 3mm, creating an elegant lighting effect.
Dazzling from every angle
An aluminum badge adorns the center of the rear fan, giving it a beautiful appearance in any orientation.
More lighting effect options
New lighting effects developed for the updated version for SL fans, offering more lighting options: Render, Tunnel, Voice and Groove.
Combine lighting effects
The merge feature allows lighting effects to flow not just on a single cluster, but across the entire system.
Simple connection to controller
The new cable module and UNI HUB controller simplify cable management and provide efficient power to the fans.
16 fans in one breath
The controller included in the triple pack supports up to 16 fans and 2 SM-type connected devices.
1. SM type port
Compatible with Galahad AIO pump ARGB cable...etc. Each port supports a maximum output of 5W.
SYNC 4 port synchronizes the lighting effects to port 4, SYNC 2 port synchronizes the lighting effects to port 2
2. Fan set ARGB + PWM signal
Supports clustering of up to 6 fans
3. 2×SATA cable
Total maximum input 29W
Main- SATA: Pluggable in all cases
Sub SATA: Plug in when more than 12 fans are connected or normally set to white static color.
4. USB cable plug
Connects to motherboard 9-pin USB connector
5. Motherboard sync functionality requires a 5V ARGB / 4 PIN PWM cable.
Notice:
When connecting more than 9 SL V2 fans to synchronize with the motherboard, please reduce the brightness of the static white light. Failure to do so may result in inaccurate colors.
only one cable
This cable module combines power and lighting cables into one, using a 7-pin connector to connect to the controller, effectively reducing the number of cables in a PC build.
Connect directly to motherboard
The single package includes a cable module with 4-pin PWM and 3-pin SM-type ARGB cables (includes 3P to 3P 5V ARGB cable) for direct connection to the motherboard.
Serrated screw holes
Serrated screw holes are used to accept standard 25mm screws for mounting with the heat sink.
It is recommended to use #6-32
Supports 25mm screws
