描述
Does the size control of i 100 Pro meet your expectations? Dimensions not included case stand
Does the size control of i 100 Pro meet your expectations?
Dimensions not included case stand
Single layer case stand height: 14.5mm
Dual layers case stand height: 20.5mm
As the first listing product of JONSPLUS.We hope to show our users the product development attitude of“Focus on the essence of the product”through her,and we hope that product line started by her will stick to this attitude, know how to restrain, focus on selected item, and offering only the best or nothing.
ID Patent number: 202030298144.6
With supporting flagship hardware, how does i100 manage to keep its size small?
For width control: we ensure the height supports flagship air cooler, by cancel the cable management space behind the motherboard, and using the space next to the fans at top or bottom for cable routing. A cable hole is designed between the power supply and the motherboard to form a better routing path. (The motherboard backplane cable routing design used in today’s ATX case may not suitable for reduced size ITX case)
For the length control:To reduced chassis length, support only most brands of 360/280 radiator.
Inquiries about i-series:
Does it obey the demand of cooling / dustproof / layout?
Does the ID design follow the function?
Three installation modes
GPU Vertical mounting + Liquid cooler
GPU horizontal mounting + air cooler
GPU horizontal mounting + AIO/liquid cooler
GPU Vertical mounting + AIO/ liquid cooler
Multi-chamber installation, CPU and GPU in different chamers ( PCI-E raiser cable included)
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·CPU cooler height : 77mm max
·Radiator support: 360/280/240/120 (fan +radiator max thickness : 55mm)
·Fan space: 6*12cm / 4*14cm cooling fan ( Optional)
·PSU support: w/o bottom fan: ATX PSII/SFX : 175mm max length
W bottom fan: ATX PSII / SFX:150mm max length
Due to there is one fan on the rear side on Reference design graphics card, and exhaust hot
air toward the PSU, it is recommended to use SFX power supply to increate the gap
for ventilation.
GPU horizontal mounting +Air cooler
Single chamber installation, support flagship air cooler, long graphics card, and standard ATX PSII power supply.
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·CPU cooler height ：166MM max
·PSU support: ATX PSII/SFX : 140mm max length
·Fan space: 3*12cm / 2*14cm cooling fan ( Optional)
GPU horizontal mounting +AIO/liquid cooler
Single chamber installation, support 360 AIO/radiator, long graphics card, and SFX power supply (115mm max).
·GPU support: 345-373mm (L)*160mm(H) *62mm (W) max
(Install side mounted dual SSD : 345mm (L), w/o SSD : 373mm(L))
·Radiator support: 360/280/240/120 (fan +radiator max thickness: 55mm)
·PSU support: SFX 115mm max length
·Fan space: 3*12cm / 2*14cm cooling fan ( Optional)
The back display of the three modes
GPU Vertical mounting + AIO/ liquid cooler
ATX/SFX power supply
GPU horizontal mounting +Air cooler
ATX/SFX power supply
GPU horizontal mounting + AIO/liquid cooler
SFX power supply
How to solve the common problem of venting issue with side panel
The first issue cause heat dissipation cause by the side panel, due to there is no vent on the panel, i 100 Pro provide the solution through the six points below:
·Dual 3 x 12cm fan mounting points on top and bottom to form a vertical air circulation .
·Increase the gap between the side panel to the vertical mounted graphics card, based on the maximum thickness of the flagship graphics card RTX3090 (60mm), the space between graphics card to case side panel is about 20mm.
·Increase the gap between vertical mounted graphics card to PSU, the back panel of graphics card to ATX PSU is 12.5mm, to SFX PSU is 35mm.
·Offset the bottom fan to ensure it blow the air directly into the gap for ventilation.
·Low wind damping nylon 380 μm dust filter .
·Adjustable dual layers case stand design to increase the ventilation space under the bottom of the case.
The ventilation gap between vertical graphics card and side tempered panel.
Offset the bottom fan design to ensure it blow the air directly into graphics card and the ventilation space.
Based on the maximum thickness of the flagship graphics card RTX3090 (60mm), the gap between the graphics card to side panel is 20mm. Base on the reference design of RTX3080, the gap between the graphics card to side panel is 36mm.
The ventilation gap between horizontal graphics card and side panel.
Directly insert the ventilated space between the horizontal graphics card and the side panel. Taking the RTX3080 graphics card width 112MM as an example, the distance between the graphics card and the side is 59MM.
The ventilation gap between motherboard to graphics card and graphics card to power supply.
Graphics card to rear of the motherboard is 6mm
Graphics card to ATX PSII PSU is 12.5mm
Graphics card to SFX PSU is 35.5mm
Dual layers all aluminum alloy case stand
The design of vertical air circ.
Single layer: 14.5mm, dual layers: 20.5mm.
Adjustable single / multi-chamber design
By flip and shift the motherboard tray, and interchangeable rear panel part, i 100 Pro can realize two motherboard layouts in single or multi-chamber, capable to support air cooler with 166mm height.
Patent number: 202021734369.2
PSU bracket/ cable management bracket with three mounting points design
In order to meet the requirement of different installation of liquid / air cooler and ATX PSU/SFX PSU, i 100 Pro’s power supply mounting bracket has three different mounting points.
Cable routing space
The 52mm cable routing space next to 360 radiator at top, and intake fan at the bottom of the case.
There are cable routing space next to both side of the PSU, SFX : 17mm+35mm / ATX PSII: 7mm+20mm.
There are two cable openings between PSU to motherboard, it can meet the cable routing requirements of GPU vertical or horizontal mounting.
There is a cable management bracket under the PSU, which can hide the power cables.
To meet the need of dust-proof design.
Top, bottom, and graphics card’s rear panel all fitted with ultrasonic molded Low wind damping nylon 380 μm dust filter.
Method of improvement points
There was no dust filter on exhaust venting opening in most cases. From our actual use and testing, we notice the dust may accumulate on the surface next to the opening for exhausting hot air after system shut down, especially near the surface next to the big vent holes on the PCI bracket.
Top dust filter
Ultrasonic molded nylon 380 μm dust filter grid like top filter with magnetic adsorption.
Knowledge Points:
Nylon mesh has better wind resistance coefficient and dust stopping power than PVC or steel mesh. The disadvantage is that requires investment of plastic molds, which increase the development costs.
Bottom dust filter
Snap fixed ultrasonic molded nylon 380 μm dust filter in plastic support frame
Rear window dust filter
Snap fixed ultrasonic molded nylon 380 μm dust filter integrate with bottom plastic support frame
PCI-e 3.0 16 X 8Gs riser caber included
This adapter cable only support PCI-E 3.0 16X, if you would like to use PCI-E4.0 protocol hardware, please set the working status to PCI-E Gen3in the motherboard BIOS in advance.
(Currently the graphics card has not yet used the full bandwidth of PC-E 3.0, in theory using with PCI-E 3.0 riser card should not cause performance lose)
Interchangeable Rear Panel
The included interchangeable rear panel for realized graphics card vertical mounting.
·Rear window equips low wind damping nylon 380 μm dust filter
Main Component material
·Front and rear and boths sides panel : 3.0mm aluminum alloy panel with 120#-150# sandblasting finishing
·Grille top Cover: ABS + PC Mechanical purposes plastic
·Inner structure: 1.0 +1.5mm steel panel with black powder coat finishing
·Dual layers Case stand with aluminum alloy
Detail of workmanship
Front and rear panel also milled and chamfered with CNC to ensure the smooth edges without scratching user’s hand, it is better and precise than ordinary edging machine treatment.
Side panel also milled and chamfered with CNC to ensure the smooth edges without scratching user’s hand.
The internal panels is treated with flat black powder coating, which has super smooth flatness characteristics.
Front I/O ports
1*power button
1* Type-C (USB3.1 Gen2)
1*USB3.0
1*Headphone
1*Mic
The decorative panel next to the power button is made of hair-line brushed aluminum alloy, with CNC diamond cutting edge, and secured on the back by pressure riveting + screw to avoid instability caused by the pasting process.
3.5” / 2.5” shard hard drive space
It is not easy for an ITX case to have a 3.5” HDD in a reasonable space, but high performance rig may requires a lot of storage, we think it is necessary to keep one.
Front panel is detachable and screw-free, to install HDD after pushing upward and releasing front panel.
2 X 2.5” HDD/SSD mounting position
Detachable 2.5” device bracket, after remove the bracket, the room for graphics card increase from 345mm to 373mm
Build up with 35 piece of parts
The seemingly simple structure layout uses 35 piece of parts to realize its various functions. To spared no expense to keep its product functional integrity.
ATX/SFX shared mounting position
GPU Vertical mounting + AIO/ liquid cooler: ATX/SFX power supply (175mm w/o bottom fan)
ATX/SFX power supply (150mm w bottom fan)
GPU horizontal mounting +Air cooler: ATX/SFX power supply (140mm length max)
GPU horizontal mounting + AIO/liquid cooler: SFX power supply (115mm length max)
Tool-free Magnetic Top Cover
The handle is made of soft nylon material, commonly used in bags, which does not increase the height of the chassis.
The top cover and the nylon filter are ultrasonically fused together, which is convenient for users to wash clean
real shot
About Precise Dimensions
For users of using customized PSU cords, the actual length and width of the power supply and graphics card will be longer, we had identified the maximum size, so users can choose to accurately calculate whether their hardware can be installed.
The power connector on the graphics card is usually lower than the heat sink module, and user need to consider this factor when calculating the height of the graphics card.
Precisely limited size for graphics card
Vertical graphics card mounting
Height dimension while vertical graphics card mounted (The thickness of theradiator with fan is 52mm)
Horizontal Graphics card mounting
GPU horizontal mounting, while in single-chamber setup, PSU mounting space size.
Horizontal Graphics card mounting
Width dimension while horizontal graphics mounted
About Precise Dimensions
Horizontal Graphics card mounting,height dimension while horizontal graphics mounted.
Precise length of riser cable
PCI-E3.0 16x included
if you would like to use PCI-E4.0 protocol hardware, please set the working status to PCI-E Gen3 in the motherboard BIOS in advance.
If users need to purchase/use PCIE riser cable from other brands, please refer to the aperture and length dimension identification shown in the figure.
Specification
- Model namei 100 Pro
- Model versionVer.1 (Magnesium aluminum alloy version, Silver)
- Product size194mm(W) x 307mm(H) x 435mm(L) (not include case stand)
- Case Stand heightSingle layer: 14.5mm, dual layers: 20.5mm
- MB supportITX, DTX (170 x 203mm) Note: When using DTX motherboard, and installing the graphics card vertically, will require to purchase an extended PCI-E cable（Length over 228mm）
- GPU Support345-373mm (L)x160mm(H)x62mm(W) (W SSD cage is 345mm,w/o SSD Cage is 373mm)
- Device Support1*3.5”HDD +2*2.5”SSD or 3*2.5”SSD.
- Fan mounting position6*12cm fan or 4*14cm fan (optional)
- PCI slots2
- Front I/O1*TYPE-C（USB3.1 Gen2)，1*USB3.0，1*AUDIO，1*MIC
- Air filter systemTop, bottom, rear，both sides (pre-installed)
- WeightNW: 6.7KG/GW: 8.8KG
- Package size550 x 310 x 450mm (WDH)
Vertical Graphics card mounting mode hardware support specification
- Radiator support (top mounting position)360/280/240/120 (fan+ radiator thickness: 55mm)
- PSU supportATX/SFX (175mm long max w/o bottom fan) ATX/SFX (150mm long max w bottom fan)
- CPU cooler height77mm max
- NotePlease purchased PCI-E that is length over 228mm riser cable when using DTX board.
Horizontal Graphics card mounting+ air cooler mode hardware support specification
- PSU supportATX/SFX (140mm long max )
- CPU cooler height166mm max
Horizontal Graphics card mounting+ liquid cooler mode hardware support specification
- PSU supportONLY support SFX, 115mm long max.
Main component material
- Front & Rear & Both sides Panel3.0mm aluminum alloy panel with 120#-150# sandblasting finishing
- Grille top CoverABS + PC Mechanical purposes plastic
- Inner structure1.0 +1.5mm steel panel with black powder coat finishing
- Case standDual layers Case stand with aluminum alloy